LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

ABB Error 37233 — Cyclic Brake Check Configuration Error

Error / Erreur

🇫🇷 Cyclic Brake Check Configuration Error

ABB — CATALOGUE PRODUCTION

ABB 37233 (“Cyclic Brake Check Configuration Error”): Cyclic Brake Check Configuration Error — ABB robot hardware event on the Cyclic Brake Check Configuration Error (IRC5).

Updated 2026-08-29 · LogrobotLM reference

What it means · Ce que ça veut dire

Cyclic Brake Check Configuration Error — ABB robot hardware event on the Cyclic Brake Check Configuration Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The cyclic brake check has found that the mechanical brake for the mechanical unit arg axis no arg should be tested according to the configuration. But the actual mechanical unit cannot be included in the Safety Controller, because activation/deactivation at runtime is allowed. The cyclic brake check will continue with other mechanical units. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

  • Inspect the Cyclic Brake Check Configuration Error, its wiring and connections first.
  • Match this code against your robot's event-log timeline before swapping parts.
  • Follow the French field checks below — they are the tested sequence for this fault.
  • probable : The motion configuration data are not correct specified for this axis.
  • The motion configuration data are not correct specified for this axis: Cyclic Brake Check has been specified but should not be done for this axis The mechanical unit must be active at startup and deactivation must not be allowed.

Frequently asked · Questions fréquentes

What does ABB error 37233 mean?
ABB 37233 (“Cyclic Brake Check Configuration Error”): Cyclic Brake Check Configuration Error — ABB robot hardware event on the Cyclic Brake Check Configuration Error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.
How do you troubleshoot ABB error 37233?
Inspect the Cyclic Brake Check Configuration Error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés

10005Program stopped10007Programme lancé10008Programme relancé

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →