ABB Error 37244 — Run chain conflict from MIB arg

What it means · Ce que ça veut dire

Run chain conflict from MIB arg — ABB robot hardware event on the Run chain conflict from MIB arg (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Only one of the two run chain feedback signals from manipulator interface board (MIB) was opened. The system is in system halt status. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Run chain conflict from MIB arg, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.

Frequently asked · Questions fréquentes

What does ABB error 37244 mean?

ABB 37244 (“Run chain conflict from MIB arg”): Run chain conflict from MIB arg — ABB robot hardware event on the Run chain conflict from MIB arg (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 37244?

Inspect the Run chain conflict from MIB arg, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés