LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 37248 — Fan porte avant cabinet fault

Error

ABB 37248 (“Fan porte avant cabinet fault”): The front door circulation fan is stopped or running too slowly. Likely part: Ventilateur porte avant armoire (fan porte avant cabinet).

Updated 2026-10-22 · LogrobotLM reference

What it means

The front door circulation fan is stopped or running too slowly.

What to check

  • Check cable, power supply and fan; clean/remove obstructions and check the cabinet temperature.
  • Note: Hardware cooling fault; may precede drive thermal errors.

Part to check / replace

ABB 37248 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

20252Motor / Thermal sensor / Temperature cable fault20253External device temperature high DRV137001Motor ON contactor activation error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →