ABB Error 38233 — Force sensor safety channel error
Error / Erreur🇫🇷 Force sensor safety channel error
ABB — CATALOGUE PRODUCTION
ABB 38233 (“Force sensor safety channel error”): Force sensor safety channel error — ABB robot hardware event on the Force sensor safety channel error (IRC5).
Updated 2026-08-29 · LogrobotLM reference
What it means · Ce que ça veut dire
Force sensor safety channel error — ABB robot hardware event on the Force sensor safety channel error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.
The safety channel in the cable between the force sensor and measurement board is under configured safety channel voltage level. The force sensor is connected to the axis computer in drive module arg . The system will go to SYS HALT and the application that uses this sensor cannot be run until cable is connected or replaced. Safety channel supervision can be disconnected in the motion configuration. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.
What to check · Que vérifier
- Inspect the Force sensor safety channel error, its wiring and connections first.
- Match this code against your robot's event-log timeline before swapping parts.
- Follow the French field checks below — they are the tested sequence for this fault.
- probable : - 1 The cable is not attached correctly.
- - 2 The cable has damage to the connectors or the cable itself.
- - 3 The sensor cable does not have safety channel.
- Assure that the cable is connected properly and inspect the connectors at both ends of the cable and the cable itself.
- Replace if damaged.
Frequently asked · Questions fréquentes
- What does ABB error 38233 mean?
- ABB 38233 (“Force sensor safety channel error”): Force sensor safety channel error — ABB robot hardware event on the Force sensor safety channel error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.
- How do you troubleshoot ABB error 38233?
- Inspect the Force sensor safety channel error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →