ABB Error 39523 — Unused Axis computer connected

What it means · Ce que ça veut dire

Unused Axis computer connected — ABB robot hardware event on the Unused Axis computer connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Axis computer in the drive module arg is connected to the main computer but not in use. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Unused Axis computer connected, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : This can be due to configuration problem.
• Disconnect the unused axis computer or setup the system to use the axis computer.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 39523 mean?

ABB 39523 (“Unused Axis computer connected”): Unused Axis computer connected — ABB robot hardware event on the Unused Axis computer connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 39523?

Inspect the Unused Axis computer connected, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés