ABB Error 40709 — I/O Device Is Not Deactivated

What it means · Ce que ça veut dire

I/O Device Is Not Deactivated — ABB robot hardware event on the I/O Device Is Not Deactivated (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . I/O device arg was not deactivated. Program ref: arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the I/O Device Is Not Deactivated, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The maximum period of waiting time was too short.
• Increase the waiting time or make a retry.
• Recovery: arg .

Frequently asked · Questions fréquentes

What does ABB error 40709 mean?

ABB 40709 (“I/O Device Is Not Deactivated”): I/O Device Is Not Deactivated — ABB robot hardware event on the I/O Device Is Not Deactivated (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 40709?

Inspect the I/O Device Is Not Deactivated, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés