ABB Error 41703 — RMQ Error - Data could not be copied

What it means · Ce que ça veut dire

RMQ Error - Data could not be copied — ABB robot hardware event on the RMQ Error - Data could not be copied (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg The data type arg exceeds the maximum size supported for the RMQ configured for task arg . Program Ref. arg The program execution is immediately stopped Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the RMQ Error - Data could not be copied, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The RMQ of the receiving task is not configured for the size of the data sent.
• The sending client have sent data that is bigger then the size the RMQ for task arg can receive.
• Increase the size of the RMQ for task arg .
• Or, send less data.
• Recovery: arg

Frequently asked · Questions fréquentes

What does ABB error 41703 mean?

ABB 41703 (“RMQ Error - Data could not be copied”): RMQ Error - Data could not be copied — ABB robot hardware event on the RMQ Error - Data could not be copied (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41703?

Inspect the RMQ Error - Data could not be copied, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés