ABB Error 41777 — The camera is not connected

What it means · Ce que ça veut dire

The camera is not connected — ABB robot hardware event on the The camera is not connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . The camera arg is not connected. The request has not been sent to the camera. Program ref: arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the The camera is not connected, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The reasons for this error can be: - 1 The camera is not connected to the controller.
• - 2 There is no power to the camera.
• - 3 The camera's IP address is not valid.
• - 4 The camera does not have a name.
• - 5 The camera is not connected to the proper network interface.

Frequently asked · Questions fréquentes

What does ABB error 41777 mean?

ABB 41777 (“The camera is not connected”): The camera is not connected — ABB robot hardware event on the The camera is not connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41777?

Inspect the The camera is not connected, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés