ABB Error 41790 — No results in image

What it means · Ce que ça veut dire

No results in image — ABB robot hardware event on the No results in image (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . 4.6 4 xxxx An image was acquired with camera arg but the output contained no result. Program ref: arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the No results in image, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : - 1 The part is not present, not sufficiently visible or otherwise not detectable in the field of view of the camera.
• - 2 The Output to Rapid configuration is not setup correctly.
• Check the following and acquire a new image: Verify that the part is in the field of view.
• Check that the image settings and vision tool settings contained in the active vision job are ok.
• Verify that the lighting has not changed since setting up the vision job.

Frequently asked · Questions fréquentes

What does ABB error 41790 mean?

ABB 41790 (“No results in image”): No results in image — ABB robot hardware event on the No results in image (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41790?

Inspect the No results in image, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés