ABB Error 41807 — Not enough memory

What it means · Ce que ça veut dire

Not enough memory — ABB robot hardware event on the Not enough memory (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . The memory allocated is not enough to complete the current calculation. Program ref: arg . The program execution is stopped immediately. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Not enough memory, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The memory allocated at startup is too small to handle the calculation.
• Use smaller sizes of the matrix used in the instruction.
• If this is not possible, report the problem to ABB Robotics.

Frequently asked · Questions fréquentes

What does ABB error 41807 mean?

ABB 41807 (“Not enough memory”): Not enough memory — ABB robot hardware event on the Not enough memory (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41807?

Inspect the Not enough memory, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés