ABB Error 41825 — EGM not connected

What it means · Ce que ça veut dire

EGM not connected — ABB robot hardware event on the EGM not connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The state of the EGM instance with EGM identity arg is not connected. The program execution is stopped immediately. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the EGM not connected, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Use the instructions EGMGetId and/or EGMSetupAI, EGMSetupAI, EGMSetupGI or EGMSetupUC, to connect EGM.
• For more information see the User Manual for EGM.

Frequently asked · Questions fréquentes

What does ABB error 41825 mean?

ABB 41825 (“EGM not connected”): EGM not connected — ABB robot hardware event on the EGM not connected (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41825?

Inspect the EGM not connected, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés