ABB Error 41883 — arg file is corrupted

What it means · Ce que ça veut dire

arg file is corrupted — ABB robot hardware event on the arg file is corrupted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . The file has been edited or a previous arg has been interrupted, and then the file was corrupted. Program ref: arg . The file has been renamed to arg . The arg will be created again next time the routine is executed. All history will be lost in arg , but can be found in the file arg in the HOME: directory. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the arg file is corrupted, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : File edited or corrupted by a previous interrupted run of the routine.

Frequently asked · Questions fréquentes

What does ABB error 41883 mean?

ABB 41883 (“arg file is corrupted”): arg file is corrupted — ABB robot hardware event on the arg file is corrupted (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 41883?

Inspect the arg file is corrupted, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés