ABB Error 50089 — Weaving changed

What it means · Ce que ça veut dire

Weaving changed — ABB robot hardware event on the Weaving changed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . The ordered weaving is not achieved due to: - High weaving frequency. - Not allowed shift of weave method or - that SingArea/Wrist is used with wrist weave. Program ref. arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Weaving changed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Increase weave length or period time.
• Don't shift between arm and wrist weave.
• Use SingArea/Off with wrist weave.

Frequently asked · Questions fréquentes

What does ABB error 50089 mean?

ABB 50089 (“Weaving changed”): Weaving changed — ABB robot hardware event on the Weaving changed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50089?

Inspect the Weaving changed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés