ABB Error 50175 — Conveyor moving

What it means · Ce que ça veut dire

Conveyor moving — ABB robot hardware event on the Conveyor moving (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Conveyor arg moving while attempt to coordinate robot TCP to conveyor work object while in prohibited mode or create objects for calibration while conveyor moving. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Conveyor moving, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• It is not possible to coordinate to conveyor while in manual reduced speed, or stepping in automatic mode, and the conveyor is moving.
• Do not use signal NewObjStrobe to create normal objects.

Frequently asked · Questions fréquentes

What does ABB error 50175 mean?

ABB 50175 (“Conveyor moving”): Conveyor moving — ABB robot hardware event on the Conveyor moving (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50175?

Inspect the Conveyor moving, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés