ABB Error 50176 — Conveyor not active

What it means · Ce que ça veut dire

Conveyor not active — ABB robot hardware event on the Conveyor not active (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Conveyor arg was not active when attempt to coordinate robot TCP to conveyor work object. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Conveyor not active, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Make sure conveyor mechanical unit is active.
• Check for fine point for last coordinated motion before DeactUnit.

Frequently asked · Questions fréquentes

What does ABB error 50176 mean?

ABB 50176 (“Conveyor not active”): Conveyor not active — ABB robot hardware event on the Conveyor not active (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50176?

Inspect the Conveyor not active, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés