ABB Error 50198 — Calibration failed

What it means · Ce que ça veut dire

Calibration failed — ABB robot hardware event on the calibration failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Internal error during calibration due to unknown origin switch. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the calibration failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• - Report the occurrence to ABB.
• - Make a new calibration.

Frequently asked · Questions fréquentes

What does ABB error 50198 mean?

ABB 50198 (“Calibration failed”): Calibration failed — ABB robot hardware event on the calibration failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50198?

Inspect the calibration failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés