ABB Error 50214 — Work area configuration failed

What it means · Ce que ça veut dire

Work area configuration failed — ABB robot hardware event on the Work area configuration failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Possibly the defined work area is larger than max allowed area for robot arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Work area configuration failed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Adjust the work area parameters in topic Motion and type Robot system parameters and try again.

Frequently asked · Questions fréquentes

What does ABB error 50214 mean?

ABB 50214 (“Work area configuration failed”): Work area configuration failed — ABB robot hardware event on the Work area configuration failed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50214?

Inspect the Work area configuration failed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés