ABB Error 50218 — Path not finished

What it means · Ce que ça veut dire

Path not finished — ABB robot hardware event on the Path not finished (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg . Previous motion path was not finished before new motion was sent. Program ref. arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Path not finished, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Use StorePath when in Trap routines.
• Move the program pointer and start a new movement.

Frequently asked · Questions fréquentes

What does ABB error 50218 mean?

ABB 50218 (“Path not finished”): Path not finished — ABB robot hardware event on the Path not finished (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50218?

Inspect the Path not finished, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés