ABB Error 50235 — No Motion interrupts received

What it means · Ce que ça veut dire

No Motion interrupts received — ABB robot hardware event on the No Motion interrupts received (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The system has not generated motion interrupts within timeout. The system goes to system failure state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the No Motion interrupts received, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : High system interrupt load or in rare cases hardware error.
• Restart the controller to resume operation.
• Check any other error log messages coinciding in time with this one for clues.
• Replace the main computer if faulty.

Frequently asked · Questions fréquentes

What does ABB error 50235 mean?

ABB 50235 (“No Motion interrupts received”): No Motion interrupts received — ABB robot hardware event on the No Motion interrupts received (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50235?

Inspect the No Motion interrupts received, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés