ABB Error 50265 — Thickness out of reach

What it means · Ce que ça veut dire

Thickness out of reach — ABB robot hardware event on the Thickness out of reach (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Servo tool: arg Programmed thickness arg mm is out of reach. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Thickness out of reach, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• - Adjust programmed thickness.
• - Check working range (min.

Frequently asked · Questions fréquentes

What does ABB error 50265 mean?

ABB 50265 (“Thickness out of reach”): Thickness out of reach — ABB robot hardware event on the Thickness out of reach (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50265?

Inspect the Thickness out of reach, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés