ABB Error 50270 — Pre position ignored

What it means · Ce que ça veut dire

Pre position ignored — ABB robot hardware event on the Pre position ignored (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Pre position was ignored during calibration of Servo Tool arg. The pre position arg mm is out of range or is larger than current pos. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Pre position ignored, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• - Skip pre position.
• - Adjust pre position.

Frequently asked · Questions fréquentes

What does ABB error 50270 mean?

ABB 50270 (“Pre position ignored”): Pre position ignored — ABB robot hardware event on the Pre position ignored (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50270?

Inspect the Pre position ignored, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés