ABB Error 50289 — Point type mismatch at sync

What it means · Ce que ça veut dire

Point type mismatch at sync — ABB robot hardware event on the Point type mismatch at sync (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The move instructions with syncId = arg , have a mix between finepoints and zonepoints. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Point type mismatch at sync, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Make sure that the move instruction in all cooperating program tasks specifies the same kind of point type, either finepoints or zonepoints.

Frequently asked · Questions fréquentes

What does ABB error 50289 mean?

ABB 50289 (“Point type mismatch at sync”): Point type mismatch at sync — ABB robot hardware event on the Point type mismatch at sync (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50289?

Inspect the Point type mismatch at sync, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés