ABB Error 50350 — Software Equalizing Not Allowed

What it means · Ce que ça veut dire

Software Equalizing Not Allowed — ABB robot hardware event on the Software Equalizing Not Allowed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

It is not possible to run Software Equalizing since Independent Move is active. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Software Equalizing Not Allowed, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Make sure independent move is not active when executing a Software Equalizing servo spot.

Frequently asked · Questions fréquentes

What does ABB error 50350 mean?

ABB 50350 (“Software Equalizing Not Allowed”): Software Equalizing Not Allowed — ABB robot hardware event on the Software Equalizing Not Allowed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50350?

Inspect the Software Equalizing Not Allowed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés