ABB Error 50361 — Brake release error

What it means · Ce que ça veut dire

Brake release error — ABB robot hardware event on the Brake release error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Too large position error of joint arg after brake release. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Brake release error, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The joint has for example collided or been blocked just before the error occurred.
• Try a few more times.
• Check cables and hardware.
• Check tuning if error on additional axis.

Frequently asked · Questions fréquentes

What does ABB error 50361 mean?

ABB 50361 (“Brake release error”): Brake release error — ABB robot hardware event on the Brake release error (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50361?

Inspect the Brake release error, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés