ABB Error 50364 — Axis in current vector mode

What it means · Ce que ça veut dire

Axis in current vector mode — ABB robot hardware event on the Axis in current vector mode (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Warning: Joint arg is configed in arg data as a current vector axis. Drive system will be disconnected for this axis during normal operation. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Axis in current vector mode, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Run service program to activate the current vector.
• Set configuration data for the DRIVE SYSTEM parameter current\_vector\_on to FALSE, for normal operation..

Frequently asked · Questions fréquentes

What does ABB error 50364 mean?

ABB 50364 (“Axis in current vector mode”): Axis in current vector mode — ABB robot hardware event on the Axis in current vector mode (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50364?

Inspect the Axis in current vector mode, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés