ABB Error 50371 — The programmed speed is too high

What it means · Ce que ça veut dire

The programmed speed is too high — ABB robot hardware event on the The programmed speed is too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The speed change functionality is only allowed for low programmed speed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the The programmed speed is too high, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The programmed speed is too high.
• Lower the programmed speed or modify the configuration parameters.

Frequently asked · Questions fréquentes

What does ABB error 50371 mean?

ABB 50371 (“The programmed speed is too high”): The programmed speed is too high — ABB robot hardware event on the The programmed speed is too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50371?

Inspect the The programmed speed is too high, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés