ABB Error 50375 — Dynamic load too high

What it means · Ce que ça veut dire

Dynamic load too high — ABB robot hardware event on the Dynamic load too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Required torque for robot arg axis arg too high. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Dynamic load too high, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• If weaving one of these actions may help: - Reduce weave frequency or weave amplitude for this movement.
• - Reduce process speed.
• - Check load data.
• - Increase zone size if small zones are used.
• - Increase distance between programmed points if they are close.

Frequently asked · Questions fréquentes

What does ABB error 50375 mean?

ABB 50375 (“Dynamic load too high”): Dynamic load too high — ABB robot hardware event on the Dynamic load too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50375?

Inspect the Dynamic load too high, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés