ABB Error 50381 — Speed too low

What it means · Ce que ça veut dire

Speed too low — ABB robot hardware event on the Speed too low (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task. arg . The speed is too low (numerical resolution). Program ref. arg . Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Speed too low, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Increase the programmed speed.
• Check also the other synchronized tasks in a MultiMove application.

Frequently asked · Questions fréquentes

What does ABB error 50381 mean?

ABB 50381 (“Speed too low”): Speed too low — ABB robot hardware event on the Speed too low (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50381?

Inspect the Speed too low, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés