ABB Error 50411 — Maximum allowed programmed TCP load exceeded

What it means · Ce que ça veut dire

Maximum allowed programmed TCP load exceeded — ABB robot hardware event on the Maximum allowed programmed TCP load exceeded (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The currently defined TCP load for robot arg exceeds the maximum allowed load for the robot variant. The robot will stop. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Maximum allowed programmed TCP load exceeded, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The combination of the current tool load arg , payload arg and the additional arm loads arg , arg exceeds the maximum load allowed for the robot variant.
• Make sure that the total TCP load is inside the load diagram for the robot.

Frequently asked · Questions fréquentes

What does ABB error 50411 mean?

ABB 50411 (“Maximum allowed programmed TCP load exceeded”): Maximum allowed programmed TCP load exceeded — ABB robot hardware event on the Maximum allowed programmed TCP load exceeded (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 50411?

Inspect the Maximum allowed programmed TCP load exceeded, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés