ABB Error 50458 — Programmed speed too high

What it means · Ce que ça veut dire

Programmed speed too high — ABB robot hardware event on the Programmed speed too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The programmed speed is too high for External Motion Interface correction arg . The program execution is stopped, and the system goes to Motors Off state. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Programmed speed too high, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : External Motion Interface correction is not allowed when the programmed speed is too high.
• Decrease the programmed path speed.

Frequently asked · Questions fréquentes

What does ABB error 50458 mean?

ABB 50458 (“Programmed speed too high”): Programmed speed too high — ABB robot hardware event on the Programmed speed too high (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50458?

Inspect the Programmed speed too high, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés