ABB Error 50461 — Too many continuous log signals

What it means · Ce que ça veut dire

Too many continuous log signals — ABB robot hardware event on the Too many continuous log signals (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The maximum number of continuous log signals have been reached. No additional log signals can be defined. The required log signal will not be defined. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Too many continuous log signals, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : To avoid high CPU load the maximum number of continuous log signals is limited to arg .
• All log signals except binary I/O signals are categorized as continuous.
• Delete any unnecessary log signals.

Frequently asked · Questions fréquentes

What does ABB error 50461 mean?

ABB 50461 (“Too many continuous log signals”): Too many continuous log signals — ABB robot hardware event on the Too many continuous log signals (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50461?

Inspect the Too many continuous log signals, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés