ABB Error 50466 — Measurement Channel Conflict

What it means · Ce que ça veut dire

Measurement Channel Conflict — ABB robot hardware event on the Measurement Channel Conflict (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Joint arg is using the same measurement channel arg as another joint. This is only allowed when they also share the same drive system. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Measurement Channel Conflict, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check the configuration file.
• Use correct parameters and reset the system.

Frequently asked · Questions fréquentes

What does ABB error 50466 mean?

ABB 50466 (“Measurement Channel Conflict”): Measurement Channel Conflict — ABB robot hardware event on the Measurement Channel Conflict (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50466?

Inspect the Measurement Channel Conflict, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés