ABB Error 50483 — Movement in wrong direction

What it means · Ce que ça veut dire

Movement in wrong direction — ABB robot hardware event on the Movement in wrong direction (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Moving from current to target position when opening arg gave a movement in wrong direction. The opening sequence will start with a closing movement. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Movement in wrong direction, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The motion force control has to move the mechanical unit back to the starting position it had when taking over from the position control, before handing back the control to the position control.
• In this case the starting position for the force movement is more closed than current position is and that will lead to closing movement before position control can take over.
• The situation indicate that there was a collision with the plate during the closing movement, that the plate thickness is not correct, or that the calibration is not correct.
• Make sure that the proper configuration is made, for example plate thickness.
• Make sure that the calibration is correct.

Frequently asked · Questions fréquentes

What does ABB error 50483 mean?

ABB 50483 (“Movement in wrong direction”): Movement in wrong direction — ABB robot hardware event on the Movement in wrong direction (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50483?

Inspect the Movement in wrong direction, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés