ABB Error 50484 — Stop-point too far away from circle

What it means · Ce que ça veut dire

Stop-point too far away from circle — ABB robot hardware event on the Stop-point too far away from circle (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Task: arg Program ref. arg The detected stop-point during execution of a SearchC instruction is too far away from the circle-arc. This can happen if a large zone is used in the preceding movement-instruction. It will not be possible to run the movement backwards. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Stop-point too far away from circle, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : A too large zone was used in the movement-instruction preceding the SearchC.
• Use a smaller zone in the movement-instruction preceding the SearchC.

Frequently asked · Questions fréquentes

What does ABB error 50484 mean?

ABB 50484 (“Stop-point too far away from circle”): Stop-point too far away from circle — ABB robot hardware event on the Stop-point too far away from circle (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50484?

Inspect the Stop-point too far away from circle, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés