ABB Error 50497 — Maximum number of axes in drive module reached

What it means · Ce que ça veut dire

Maximum number of axes in drive module reached — ABB robot hardware event on the Maximum number of axes in drive module reached (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Joint arg is configured so that the total number of axes in the drive module becomes larger than maximum allowed (14). Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Maximum number of axes in drive module reached, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Check the configuration file.
• Use correct parameters and reset the system.

Frequently asked · Questions fréquentes

What does ABB error 50497 mean?

ABB 50497 (“Maximum number of axes in drive module reached”): Maximum number of axes in drive module reached — ABB robot hardware event on the Maximum number of axes in drive module reached (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 50497?

Inspect the Maximum number of axes in drive module reached, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés