ABB Error 50503 — Collision Avoidance inactive during jogging

What it means · Ce que ça veut dire

Collision Avoidance inactive during jogging — ABB robot hardware event on the Collision Avoidance inactive during jogging (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Collision Avoidance will not be active when using Responsive jogging. No collision checks will be made during jogging. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Collision Avoidance inactive during jogging, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Continue jogging but be aware of that no collision checks are made.
• If collision checks are desired during jogging, change to Standard jogging mode.

Frequently asked · Questions fréquentes

What does ABB error 50503 mean?

ABB 50503 (“Collision Avoidance inactive during jogging”): Collision Avoidance inactive during jogging — ABB robot hardware event on the Collision Avoidance inactive during jogging (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 50503?

Inspect the Collision Avoidance inactive during jogging, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés