ABB Error 50514 — No calibration tool found

What it means · Ce que ça veut dire

No calibration tool found — ABB robot hardware event on the No calibration tool found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Calibration of axis arg for mechanical unit arg failed. No calibration tool was detected. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the No calibration tool found, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• - Verify that all calibration tools are properly mounted.
• - Verify that revolution counters are properly updated.
• - If Axis Calibration data has been changed, make sure correct data was used.

Frequently asked · Questions fréquentes

What does ABB error 50514 mean?

ABB 50514 (“No calibration tool found”): No calibration tool found — ABB robot hardware event on the No calibration tool found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 50514?

Inspect the No calibration tool found, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés