ABB Error 573 — Measurement system fault
ErrorABB 573 (“Measurement system fault”): Error detected by the measurement system diagnostics on axes 7 to 12. Likely part: Measurement system (Measurement system).
Updated 2026-10-22 · LogrobotLM reference
What it means
Error detected by the measurement system diagnostics on axes 7 to 12.
What to check
- Refer to the axis subcodes in chapter 6.
- Note: Similar to axis computer errors (32575) or measurement link errors on IRC5.
Part to check / replace
ABB 573 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →