ABB Error 71056 — Power fail restore full

What it means · Ce que ça veut dire

Power fail restore full — ABB robot hardware event on the Power fail restore full (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

Signal <arg> could not be setup for power failure restore. The table for power fail is full. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Power fail restore full, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Remove some other signals from the restore list.

Frequently asked · Questions fréquentes

What does ABB error 71056 mean?

ABB 71056 (“Power fail restore full”): Power fail restore full — ABB robot hardware event on the Power fail restore full (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71056?

Inspect the Power fail restore full, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés