LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

ABB Error 71220 — No PROFIBUS option has been installed

Error / Erreur

🇫🇷 No PROFIBUS option has been installed

ABB — CATALOGUE PRODUCTION

ABB 71220 (“No PROFIBUS option has been installed”): No PROFIBUS option has been installed — ABB robot hardware event on the No PROFIBUS option has been installed (IRC5).

Updated 2026-08-29 · LogrobotLM reference

What it means · Ce que ça veut dire

No PROFIBUS option has been installed — ABB robot hardware event on the No PROFIBUS option has been installed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

A PROFIBUS board has been fitted, but no PROFIBUS option has been installed. No communication on the PROFIBUS network is possible. There may be consequential errors from configuring the PROFIBUS network when no such option has been installed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

  • Inspect the No PROFIBUS option has been installed, its wiring and connections first.
  • Match this code against your robot's event-log timeline before swapping parts.
  • Follow the French field checks below — they are the tested sequence for this fault.
  • probable : An attempt may have been made to add the PROFIBUS functionality, without installing the option correctly.
  • If the PROFIBUS option is required: configure a new system with this option, and install the system.
  • If the PROFIBUS option is not required: configure a new system without this option, and install the system.

Frequently asked · Questions fréquentes

What does ABB error 71220 mean?
ABB 71220 (“No PROFIBUS option has been installed”): No PROFIBUS option has been installed — ABB robot hardware event on the No PROFIBUS option has been installed (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.
How do you troubleshoot ABB error 71220?
Inspect the No PROFIBUS option has been installed, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés

10005Program stopped10007Programme lancé10008Programme relancé

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →