ABB Error 71258 — Interbus file not found

What it means · Ce que ça veut dire

Interbus file not found — ABB robot hardware event on the Interbus file not found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The Interbus configuration file arg, configured in the system parameters, was not found. The bus has not been configured, and cannot be used by the system. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Interbus file not found, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The Interbus configuration file does not exist or the path specified in the system parameters was incorrect.
• - 1) Make sure the Interbus configuration files are correctly located.
• - 2) Use RobotStudioOnline to check the path to the configuration files.

Frequently asked · Questions fréquentes

What does ABB error 71258 mean?

ABB 71258 (“Interbus file not found”): Interbus file not found — ABB robot hardware event on the Interbus file not found (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71258?

Inspect the Interbus file not found, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés