ABB Error 71317 — I/O device reset

What it means · Ce que ça veut dire

I/O device reset — ABB robot hardware event on the I/O device reset (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The I/O device arg on the network arg has been reset through the device command arg , to make sure that the device command values are activated. This causes the I/O device to loose contact while it is restarted but it will regain contact. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the I/O device reset, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : A device command for reset has been defined for the I/O device in the configuration of the I/O system.

Frequently asked · Questions fréquentes

What does ABB error 71317 mean?

ABB 71317 (“I/O device reset”): I/O device reset — ABB robot hardware event on the I/O device reset (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71317?

Inspect the I/O device reset, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés