ABB Error 71363 — Slave configuration invalid

What it means · Ce que ça veut dire

Slave configuration invalid — ABB robot hardware event on the Slave configuration invalid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The unit arg configured on the master address is not valid as an internal slave. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Slave configuration invalid, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Change the address on the unit.
• Change the unit type on the unit to DN\_SLAVE.

Frequently asked · Questions fréquentes

What does ABB error 71363 mean?

ABB 71363 (“Slave configuration invalid”): Slave configuration invalid — ABB robot hardware event on the Slave configuration invalid (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71363?

Inspect the Slave configuration invalid, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés