ABB Error 71386 — DeviceNet Quick Connect not supported

What it means · Ce que ça veut dire

DeviceNet Quick Connect not supported — ABB robot hardware event on the DeviceNet Quick Connect not supported (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The unit type <arg> may not be connected to the DeviceNet bus as a Quick Connect unit. This unit type has been rejected, and no functions depending on this unit type will work. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the DeviceNet Quick Connect not supported, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The unit connected may be of a too early version.
• - 1) Disable the Quick Connect configuration parameter 2) Replace the DeviceNet master/slave board with a later version.

Frequently asked · Questions fréquentes

What does ABB error 71386 mean?

ABB 71386 (“DeviceNet Quick Connect not supported”): DeviceNet Quick Connect not supported — ABB robot hardware event on the DeviceNet Quick Connect not supported (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71386?

Inspect the DeviceNet Quick Connect not supported, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés