ABB Error 71401 — No option exist for the arg Fieldbus Adapter

What it means · Ce que ça veut dire

No option exist for the arg Fieldbus Adapter — ABB robot hardware event on the No option exist for the arg Fieldbus Adapter (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

A arg Fieldbus Adapter has been found, but no option has been installed. No communication on arg Fieldbus Adapter is possible. There may be consequential errors from configuring when no such option has been installed. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the No option exist for the arg Fieldbus Adapter, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : An attempt may have been made to add the arg Fieldbus Adapter functionality, without installing the option correctly.
• If the arg Fieldbus Adapter option is required: configure a new system with this option, and install the system.

Frequently asked · Questions fréquentes

What does ABB error 71401 mean?

ABB 71401 (“No option exist for the arg Fieldbus Adapter”): No option exist for the arg Fieldbus Adapter — ABB robot hardware event on the No option exist for the arg Fieldbus Adapter (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 71401?

Inspect the No option exist for the arg Fieldbus Adapter, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés