ABB Error 71428 — DeviceNet I/O device configured

What it means · Ce que ça veut dire

DeviceNet I/O device configured — ABB robot hardware event on the DeviceNet I/O device configured (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

A new I/O device has been found and configured on the DeviceNet network. Device name: arg . Device address: arg . Input bytes / Output bytes: arg . Vendor ID: arg . Product code: arg Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the DeviceNet I/O device configured, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Restart the controller to activate the I/O device configuration.
• Edit or delete the configuration.

Frequently asked · Questions fréquentes

What does ABB error 71428 mean?

ABB 71428 (“DeviceNet I/O device configured”): DeviceNet I/O device configured — ABB robot hardware event on the DeviceNet I/O device configured (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

How do you troubleshoot ABB error 71428?

Inspect the DeviceNet I/O device configured, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés