ABB Error 71458 — Could not change the default gateway address

What it means · Ce que ça veut dire

Could not change the default gateway address — ABB robot hardware event on the Could not change the default gateway address (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

If no destination address is specified in the Ethernet/IP configuration, the default controller gateway address will be changed. The destination address was not given and the specified gateway address arg was not valid and could not be used. No communication on the EtherNet/IP network is possible. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Could not change the default gateway address, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Correct the gateway in the EtherNet/IP network configuration.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 71458 mean?

ABB 71458 (“Could not change the default gateway address”): Could not change the default gateway address — ABB robot hardware event on the Could not change the default gateway address (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 71458?

Inspect the Could not change the default gateway address, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés