ABB Error 71460 — Not able to connect to EtherNet/IP adapter

What it means · Ce que ça veut dire

Not able to connect to EtherNet/IP adapter — ABB robot hardware event on the Not able to connect to EtherNet/IP adapter (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The configured adapter arg with address arg does not physically exist on the EtherNet/IP network. It is not possible to access the adapter itself or I/O signals on the adapter since it is currently not communicating with the controller. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Not able to connect to EtherNet/IP adapter, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The adapter does not exist physically.
• The adapter address is wrong.
• The adapter is malfunctioning.
• Check that the adapter physically exists on the EtherNet/IP network and that the address is correct.
• If the address has been changed, restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 71460 mean?

ABB 71460 (“Not able to connect to EtherNet/IP adapter”): Not able to connect to EtherNet/IP adapter — ABB robot hardware event on the Not able to connect to EtherNet/IP adapter (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 71460?

Inspect the Not able to connect to EtherNet/IP adapter, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés