ABB Error 71461 — Duplicated address on the EtherNet/IP network

What it means · Ce que ça veut dire

Duplicated address on the EtherNet/IP network — ABB robot hardware event on the Duplicated address on the EtherNet/IP network (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The adapter arg and the EtherNet/IP scanner have been configured with the same address in the controller. It is not possible to access the adapter or I/O signals on it, since it is currently not communicating with the controller. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the Duplicated address on the EtherNet/IP network, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• Change the address for the adapter or the address for the EtherNet/IP controller in the I/O configuration.
• If changing the I/O device address and it have this address physically it must also be changed in the adapter.
• Restart the controller.

Frequently asked · Questions fréquentes

What does ABB error 71461 mean?

ABB 71461 (“Duplicated address on the EtherNet/IP network”): Duplicated address on the EtherNet/IP network — ABB robot hardware event on the Duplicated address on the EtherNet/IP network (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 71461?

Inspect the Duplicated address on the EtherNet/IP network, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés