ABB Error 71495 — PROFINET controller option license is missing

What it means · Ce que ça veut dire

PROFINET controller option license is missing — ABB robot hardware event on the PROFINET controller option license is missing (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains authoritative.

The option license needed to run the arg network as a PROFINET controller on the controller was not detected. The I/O device arg is not defined as an internal PROFINET device. No communication with the I/O device arg is possible. Le texte constructeur de ce code n'existe qu'en anglais dans les manuels ABB dont il provient. Il est reproduit tel quel ci-dessus ; le manuel de votre robot fait foi.

What to check · Que vérifier

• Inspect the PROFINET controller option license is missing, its wiring and connections first.
• Match this code against your robot's event-log timeline before swapping parts.
• Follow the French field checks below — they are the tested sequence for this fault.
• probable : The installed option license for the arg network only supports one internal PROFINET device.
• Configure a new system with the PROFINET controller/device option or remove the I/O device arg from the I/O configuration.

Frequently asked · Questions fréquentes

What does ABB error 71495 mean?

ABB 71495 (“PROFINET controller option license is missing”): PROFINET controller option license is missing — ABB robot hardware event on the PROFINET controller option license is missing (IRC5). Specific to this controller generation. Severity: Major. Field diagnosis below (French); your robot's own manual remains…

How do you troubleshoot ABB error 71495?

Inspect the PROFINET controller option license is missing, its wiring and connections first. Match this code against your robot's event-log timeline before swapping parts. Follow the French field checks below — they are the tested sequence for this fault.

Related codes / Codes liés